Thoughtventions Unlimited

High Vacuum Station - Thoughtventions will build to your specs, using surplus, reconditioned, new or mixed.  Diffusion pumped systems and non-standard component interfacing a speciality.

Front view of High Vacuum Station with Diffusion pump and Manual Control Zoom of High Vacuum Station Manual Control Panel Side view of High Vacuum Station Cabinet Interior
Click on the Above for  larger images

Specifications (for unit shown above) :
 
Cage Size (inc. wheels)  26" x 30.5" x 36.5" (WxDxH)
Gross Weight 350 lbs
Ultimate Vacuum 1 x 10-6 Torr
Pump Down Time  (Initial Roughing)  6 minutes
Diffusion Pump Warmup 10 minutes
Pump Down Time (Complete) 16 minutes
Up & Down Cycle Time  5 minutes
Vacuum Valves All Electro-Pneumatic
Venting/Purge Valves Electric
Rough pump Edwards E2M2
Diffusion pump Varian HSA-2, 350W Air Cooled, 2"
Control System Manual Control Panel , Meter, Lamp Indicators and Buzzer Alarm
Interlocking Circuit Breakers, Diffusion Pump Over-temperature, 
Pneumatic Under-Pressure
Power 30 amps 125 VAC 
Auxilliary Power 15 Amp surge protected for User Devices
Pneumatics 60 psi compressed air
Meters T/C, 2 @ 2000-1 microns (Foreline & Main Chamber)

Many other configurations available, including  fully automatic pumpdown,  full interlocking,  turbo-pump & oil free systems, Alternative metering, Water Cooling, Auxilliary and dual rough pumping for faster evacuation & cycle times. Plenty of room in cooled cabinet for your own equipment. Upper Vacuum chamber possibilities: Blanked-off 4 (or 8) way Bell Jar Collar (as shown), 2 & 4 way Tee chambers, Hex chambers, and Bell Jars.

For discussions of your application needs and/or quotations please E-Mail comments, click this address: thought@tvu.com  or phone Steve Bates at 860-657-9014.


 
TvU R&D Services Thoughtventions Home Page